->
Compression Testers: What do they do and how do they work?
arrow.jpg arrow2.jpg bigdawg_batrolling037012.jpg bigdawg_batrolling037011.jpg bigdawg_batrolling037010.jpg bigdawg_batrolling037009.jpg
Broken Bat Guarantee

The Purpose of a barrel compression tester from the G4 SSL website “The SSL portable barrel compression fixtures or bat testers were developed for the softball and baseball industry to measure the barrel stiffness of a bat. The barrel compression of a bat correlates to its performance. The lower the compression, the better the bat will perform”. Per the G4 SSL website the applications are: “The devices are used to determine when a bat has exceeded its intended life and also reveals when bat barrels have been tampered with (i.e. when a bat has been rolled or when the bat barrel has been shaved). The tester is commonly used to test bats before games, tournaments, and is also used for quality control purposes”. So basically the ASA, NCAA, and the USsA have come up with set standards of barrel compressions that deem a bat unusable or useable in their sanctioned events. There is not a lot of literature on the procedures for barrel compression testing but the G4 website does have instructions. There is a reference rod that allows the bats to be measured at the 6 inch location on the barrel. The barrel of the bat is butted up to that rod and cannot touch the sides of the compression tester frame. The pressure gauge is then set to zero (USSSA) or 500 (ASA/NCAA). Then the lever is pulled up to measure compression: 1550psi for a fast pitch bat, 1450 for an ASA slow pitch bat and 220 for a USSA slow pitch bat are the pass/fail thresholds. Baseball , for some reason, does not have a pass/fail figure yet but they sell the machine for $1350 ($500 more than the ASA/NCAA or USSA testers). The site also has a USSA testing session before a Major Men’s slow pitch softball tournament. (A couple things I find odd about the video is that the tester places his hand on the tester when pulling up the lever to lock it in place. My research verifies that extra pressure on the top of the machine can change the reading of the gauge by as much as 65psi. The other issue is the failing of a bat on the first test and it is unusable, there are just too many variables. I mention this only because the machines have a + or – of 100 psi when calibrating but not when testing. The gauge also has a lag when getting to the zero. This is a little hard to explain but I will try; the needle does not respond instantaneously when moved, it kind of lags and there is some play from the needle to the gauge wheel. This “play” or “lag” can cause discrepancies in your reading. Even with the machine’s range of +/- 100 psi and human error the compression tester is still a great way to keep unusable bats out of sanctioned play.
ASA compression conversion chart usssa bigdawg_batrolling037007.jpg
1450psi and above is a passing bat in the ASA (with exceptions below).

1550psi and above is a passing bat in the ASA/NCAAA for fastpitch bats (with exception below).

In the USS A 220 is a passing bat (with exceptions below).

The compression conversion chart to my left is a simple way to convert a ASA tester to USS A or vice versa.
Concerning the DM Flipper in USS A sanctioned play

-"As there continues to be some confusion on the Demarini flipper model bat, USS A/GSL legal counsel has provided the following additional guidance to that issued earlier this year by Kevin Naegele, Executive VP USS A Softball: It has become apparent that the current rule of not using the compression device on
DeMarini Flipper model bats is not a comfortable approach for all USS A and GSL directors. Therefore effective immediately, USS A/GSL will allow the use of the at the field compression device on the DeMarini Flipper model bat with a 40 # additional preload to adjust for substantial gap between the outer wall and the rest of the interior of the barrel. So when using the Compression Device, the operator will place the Flipper bat in the device, turn the dial to the set preload and then continue to turn the dial for an additional 40 # of preload before pushing down on the Compression Device lever to see if the bat passes or not. The DeMarini Flipper model bat remains legal and approved equipment in USS A/GSL sanctioned tournament and league play. It may be compression tested with an additional 40# preload or allowed without compression testing in the discretion of the event director."
http://www.rockymountainusssa.com/ April 9, 2015
bigdawg_batrolling037002.jpg 90day2.jpg
Bat Rolling
Bat Shaving
End Cap Repair
Ring Removal
End Loading
Compression Testing
Bat Services
Glove Steaming Home Contact
Rolled Baseball Bats
Shaved Baseball Bats
Rolled Fast Pitch Bats
Shaved Fast Pitch Bats
Rolled Slow Pitch Bats
Shaved Slow Pitch Bats
Bats for Sale
FAQ
About
Testimonials
Agreement
Information Blog
FAQ